Winkswood | Danish Oil 500ml

• Winkswood Danish Oil is a finish suitable for all types of wood
• It differs from Teak Oil in that it contains special ingredients, which prevent it drying to a gloss
• It is an easy to use wipe-on finish, which brings out the beauty of the timber and gives a natural, open grained, soft lustrous finish
• Ideal for all woods and is excellent on turned woodwork
• Brandon Winks, well known local French Polisher, wood turner and technician in the piano trade has developed this Danish Oil formulation paying attention to traditional recipes
• After testing and using it he is proud enough to put his name to it
• It joins Winkswood Woodturners Friction Polish and Winkswood Polish Restorer for sale in our shop and online
• Whilst the best ingredients are used, the cost on importation is saved as it is a locally produced product
• BPM Toolcraft is glad to pass on this saving to you
• It creates a low-sheen open grain finish
• Leaves no brush marks or orange peel
• Contains UV protection
• Is food safe when set
• Recommended for sealing trivets and salad utensils
• Excellent for sealing potjies and cast iron pans and left to cold set
• Also for turned bowls, platters and peppermills
• For use on finely sanded (at least 220 grit) wooden furniture and sculptings
• This product enhances the grain patterning on all woods
• Winkswood Danish Oil has tested safe to use over any other Danish Oil finish

Directions for use:

• Shake contents before use
• Do not thin this product at all
• After rubbing off any sanding dust with cotton towelling, rag on mixture with fine mutton cloth or T-shirting
• Brush onto mouldings or carvings and into corners
• Wipe off again with cloth or tissue paper
• Allow to dry overnight
• May be de-nibbed with 0000 steel wool or 600 grit paper
• Towel off dust and apply a second coat in the same manner
• More coats may be applied to create a lustrous built-up finish
• May be waxed with quality paste wax when set, for extra shine
• This product will yellow light colour woods
• Clean thread of container thoroughly before closing or contents will weld top shut!