Marson 50-Pack #10-24 .020-.130 Klik Poly-Nuts Rivet (47435)

The Marson 50-Pack #10-24 .020-.130 Klik Poly-Nuts Rivet (47435) is a steel blind threaded insert designed to create secure, permanent, and captive #10-24 threads in thin-gauge materials. Suitable for metal, fiberglass, and rigid plastic applications, the insert can be installed when access is available from only one side of the workpiece. Its O-style round body and low-profile head provide a near-flush installation without requiring countersinking or dimpling, while the zinc clear trivalent chromate finish helps protect the steel body from environmental corrosion. The 50-piece pack is suitable for automotive repair, industrial assembly, manufacturing, and fabrication applications.Key Features and Benefits: Near-Flush Installation: The low-profile head sits close to the material surface for a clean, professional appearance. Reduced Surface Preparation: Eliminates the need for additional operations such as countersinking or dimpling the parent material. Versatile Material Compatibility: Creates dependable threads in thin metal, fiberglass, and rigid plastic substrates. Corrosion-Resistant Finish: Zinc clear trivalent chromate coating helps protect the steel insert from oxidation. Blind-Side Installation: Allows a threaded attachment point to be created when the reverse side of the workpiece is inaccessible. Broad Tool Compatibility: Suitable for installation with compatible manual and pneumatic rivet nut tools.Specifications: Product Name: Marson 50-Pack #10-24 .020-.130 Klik Poly-Nuts Rivet (47435) Part Number: 47435 Pack Capacity: 50 rivet nut inserts Thread Size: #10-24 UNC-2B Grip Range: 0.020 to 0.130 inches or approximately 0.51 to 3.30mm Body Material: 1008/1010 steel Finish: Zinc clear trivalent chromate Finish Standard: ASTM B-633 Type I, Class 2 Body Style: O-style round body Head Type: Low profile Head Diameter: 0.320 inches or 8.13mm Head Height: 0.020 inches or 0.51mm Body Length: 0.465 inches or 11.81mm Set Body Length: 0.330 inches or 8.38mm Minimum Hole Size: 0.281 inches or 7.14mm Maximum Hole Size: 0.285 inches or 7.24mm Recommended Drill Size: K Compliance: RoHS 3 Package Contents: 50 Marson 47435 Klik Poly-Nut rivet insertsHow to Use: Prepare the Mounting Hole: Drill or punch a clean hole using a K-size drill bit, maintaining a diameter between 0.281 and 0.285 inches. Remove Burrs and Debris: Clean the opening to ensure the insert sits evenly against the material surface. Load the Poly-Nut: Thread the Marson 47435 insert onto the mandrel of a compatible manual or pneumatic rivet nut tool. Position the Insert: Place the rivet nut into the prepared hole until the low-profile flange rests flush against the workpiece. Set the Poly-Nut: Operate the installation tool to retract the mandrel and collapse the insert body against the reverse side of the material. Check the Installation: Confirm that the insert is securely compressed, properly aligned, and does not rotate within the hole. Remove the Tool: Unscrew or release the mandrel from the installed rivet nut. Attach the Component: Position the component over the insert and secure it using a compatible #10-24 screw or bolt.Benefits of Using Marson 50-Pack #10-24 .020-.130 Klik Poly-Nuts Rivet (47435): Creates Strong Threads in Thin Materials: Provides reliable thread engagement where the substrate is too thin for conventional tapping. Supports One-Sided Assembly: Eliminates the need to hold a separate nut behind enclosed panels or inaccessible structures. Maintains a Streamlined Finish: Compact head geometry reduces protrusion and interference with nearby components. Improves Assembly Efficiency: Combines blind fastening and thread creation into a single installation procedure. Supports Removable Attachments: Creates a permanent threaded mounting point that allows components to be removed and reinstalled. Provides Consistent Holding Strength: Properly collapsed body helps resist spinning, loosening, and pull-out under normal operating loads.Features: Standard Imperial Thread Profile: Accepts commonly available #10-24 UNC-2B screws and bolts. Controlled Deformation Body: Low-carbon steel construction is designed to compress evenly behind the mounting surface. Defined Material Thickness Range: Accommodates workpieces measuring from 0.020 to 0.130 inches thick. Round Exterior Geometry: O-style body fits standardized mounting holes and supports consistent positioning. Rotation-Resistant Installation: Proper tool setting creates a captive insert designed to remain stable during bolt tightening. Protective Plated Surface: Trivalent chromate treatment provides additional resistance to moisture and environmental exposure. Bulk Pack Configuration: Supplied in a 50-piece quantity for repair work, assembly projects, and small production runs.