Sinsui Dual Mode Ultrasonic Moisture Meter MC-7825PS

Knowing the moisture content of a material is important for a variety of reasons. When lining a house the framing must be18%or less or theGib plasterboard (R) will ‘pop’ and ruin the finish as the framing timber dries out later. You might also want to test areas of your home and do comparative tests on various walls or ceilings etc so you canmake sure you don’t become another victim of ‘leaky building syndrome’. And if you’re a woodworker you probably want to check thetimber for moisture before you buy it.

This is an advanced model moisture meter with two measuring methods.

CONDUCTIVITY MODE
This is the traditional method used by most moisture meters, where the sharp pins of the probe are pushed into the material being measured. Thisis the most suitable method for checking framing moisture levels before wall linings have been applied because the pins will leave small holes.

ULTRASONIC MODE
Using this mode is very quick and easy. Just hold the front sensor against the surface andit displays the moisture level. There is no intrusion into the surfaceso it’sgood for quickly finding ‘trouble spots’ around a building.

SPECIFICATIONS
Range 0 to 80% moisture
Accuracy +/- 0.5% moisture
Measuring depth 20mm
Easy-read 10mmLCD display
Powered by 4 x AAA batteries
Dimensions 62W x 165H x 26D mm
Weight 175g

FEATURES
Hold button
Maximum reading recall
Auto power off 5 minutes
Presettable quick check LED alarms, green, orange, and red

FOR MATERIALS
Soft, medium woods
Plasterboard
Cardboard
Chipboard
Bamboo
Foam
Paper
Sand

SUPPLIED WITH
Moisture Meter Wood Tester Dual Mode MC-7825PS
Plug-in two pin sensor probe
Hard plastic carry case
Two spare probe pins
Instructions