Tork Craft | Drill Bit Masonry 8X400mm

8X400mm Masonry Drill Bit

The drill bit is used to drill holes in masonry, thanks to the uniquely designed TCT (tungsten carbide tipped) point.

A percussion (hammer action) drill with a 3 jaw chuck is required. Pre-set the depth gauge on the drill to achieve the correct depth before drilling into walls.

• Drill diameter: 8.0mm
• Length: 400mm
• Drill bit: TCT (Tungsten carbide tipped)

TIP: Have a wall scanner (detector) ready before drilling into walls.