Tork Craft | Drill Bit Masonry/Concrete 10mm 1/Card

10mm Masonry/Concrete Drill Bit

The drill bit is used to drill holes inmasonryorconcrete, thanks to the uniquely designed TCT (tungsten carbide tipped) point.

A percussion (hammer action) drill with a 3 jaw chuck is required. Pre-set the depth gauge on the drill to achieve the correct depth before drilling into walls.

• Drill diameter:10.0mm
• Drill bit:TCT (Tungsten carbide tipped)

TIP:Have a wall scanner (detector) ready before drilling into walls.

CAUTION:Do not use the drill bit with a rotary hammer. The impact energy will break the conversion chuck.